Roadware Safety Dots
Roadware distributor Bill Bacha of Precision Devices in Connecticut has developed an innovative way to create yellow safety markings in warehouse and cold storage floors. By simply using a 4′ core drill and Roadware Concrete Mender in Safety Yellow, Bill can mark safety areas that are permanent and can be applied at temperatures well below freezing.
Use a core drill to make 3″ circle impressions about 1/4″ inch deep.
Fill the circles with Roadware Concrete Mender in Safety Yellow color.
The safety circles will cure yellow in about 15 minutes at 70 degrees F or in an hour at 0 degrees F.
Roadware Concrete Mender in Safety Yellow permanently bonds with the concrete using Roadware’s Microdoweling™ technology.
• Integral color will not peel or chip-off.
• Apply in temperatures as low as -20°F.
• Cures forklift traffic ready in 15 minutes at 70°F.
• Easy to clean and maintain.
• High chemical resistance.
• Based on Roadware’s proven Microdoweling™ technology.
Ordering:
Call Roadware at 800-522-7623
Item 70300-y (300x300ml cartridge) Concrete Mender in Safety Yellow
Item 70020-y (2 gallon kit) Concrete Mender in Safety Yellow
